 |
Settings |
System Setup
The unit allows you to configure advanced settings to provide you with an even better experience.
Operation:
Use the on-screen displays (OSD) that appear on the TV to make the settings.
Press 
on the remote controller to display the Home screen, then select System Setup with the cursors on the remote controller and press ENTER.
Select the item with the cursor 
/
/
/
buttons of the remote controller and press ENTER to confirm your selection.
Use the cursors 
/
to change the default values.
To return to the previous screen, press 
.
To exit the settings, press 
.
Input/Output Assign
Make settings related to output to the TV, change the settings for jack allocations to the various input selectors, and set the feature for displaying operations on the TV (OSD), etc.
TV Out/OSD
HDMI Out
Select the HDMI jack to be connected with the TV.
"MAIN": When connecting the TV to the HDMI OUT MAIN jack
"SUB": When connecting the TV to the HDMI OUT SUB jack
"MAIN+SUB": When connecting to both the MAIN and SUB jacks
1080p -> 4K Upscaling
When using a TV that supports 4K, video signals input at 1080p can be automatically upscaled to 4K for output.
"Off": Do not use this function
"Auto": Use this function
Select "Off" if your TV does not support 4K.
Super Resolution
When you have set "System Setup" - "Input/Output Assign" - "TV Out/OSD" - "1080p -> 4K Upscaling" to "Auto", you can select the degree of video signal correction from "Off" and between "1" (weak) and "3" (strong).
Zone 2 HDMI
Make the setting when you output to the Zone 2 TV connected to the HDMI OUT ZONE 2/SUB jack.
"Use": Enable this function
"Not Use": Disable this function
OSD Language
Select the on-screen display language from the following.
(North American models) English, German, French,Spanish, Italian, Dutch, Swedish
(European and Asian models) English, German, French, Spanish, Italian, Dutch, Swedish, Russian, Chinese
Impose OSD
Set whether or not to display the information on the TV when the volume is adjusted or input is changed, for example.
"On": OSD displayed on the TV
"Off": OSD not displayed on the TV
OSD may not be displayed depending on the input signal even if "On" is selected. If the operation screen is not displayed, change the resolution of the connected device.
Screen Saver
Set the time to start the screen saver.
Select a value from "3 minutes", "5 minutes", "10 minutes" and "Off".
HDMI Input
You can change input assignment between the input selectors and HDMI IN jacks.
BD/DVD
"HDMI 1 (HDCP 2.2)" to "HDMI 4 （HDCP 2.2）": Assign a desired HDMI IN jack to the BD/DVD input selector. If you do not assign a jack, select "-----". To select an HDMI IN jack already assigned to another input selector, change the input selector setting to "-----" first.
CBL/SAT
"HDMI 1 (HDCP 2.2)" to "HDMI 4 （HDCP 2.2）": Assign a desired HDMI IN jack to the CBL/SAT input selector. If you do not assign a jack, select "-----". To select an HDMI IN jack already assigned to another input selector, change the input selector setting to "-----" first.
GAME
"HDMI 1 (HDCP 2.2)" to "HDMI 4 （HDCP 2.2）": Assign a desired HDMI IN jack to the GAME input selector. If you do not assign a jack, select "-----". To select an HDMI IN jack already assigned to another input selector, change the input selector setting to "-----" first.
STRM BOX
"HDMI 1 (HDCP 2.2)" to "HDMI 4 （HDCP 2.2）": Assign a desired HDMI IN jack to the STRM BOX input selector. If you do not assign a jack, select "-----". To select an HDMI IN jack already assigned to another input selector, change the input selector setting to "-----" first.
Video Input
You can change input assignment between the input selectors and COMPONENT VIDEO IN jack and the VIDEO IN jacks. If you do not assign a jack, select "-----".
BD/DVD
"COMPONENT 1", "COMPONENT 2": Assign the COMPONENT VIDEO IN jacks to the BD/DVD input selector.
"VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN jack to the BD/DVD input selector.
CBL/SAT
"COMPONENT 1", "COMPONENT 2": Assign the COMPONENT VIDEO IN jacks to the CBL/SAT input selector.
"VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN jack to the CBL/SAT input selector.
GAME
"COMPONENT 1", "COMPONENT 2": Assign the COMPONENT VIDEO IN jacks to the GAME input selector.
"VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN jack to the GAME input selector.
STRM BOX
"COMPONENT 1", "COMPONENT 2": Assign the COMPONENT VIDEO IN jacks to the STRM BOX input selector.
"VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN jack to the STRM BOX input selector.
Digital Audio Input
You can change input assignment between the input selectors and DIGITAL AUDIO IN COAXIAL/OPTICAL jacks. If you do not assign a jack, select "-----".
BD/DVD
"COAXIAL 1", "COAXIAL 2", "OPTICAL 1", "OPTICAL 2", "OPTICAL 3": Assign a desired DIGITAL AUDIO IN jack to the BD/DVD input selector.
CBL/SAT
"COAXIAL 1", "COAXIAL 2", "OPTICAL 1", "OPTICAL 2", "OPTICAL 3": Assign a desired DIGITAL AUDIO IN jack to the CBL/SAT input selector.
GAME
"COAXIAL 1", "COAXIAL 2", "OPTICAL 1", "OPTICAL 2", "OPTICAL 3": Assign a desired DIGITAL AUDIO IN jack to the GAME input selector.
STRM BOX
"COAXIAL 1", "COAXIAL 2", "OPTICAL 1", "OPTICAL 2", "OPTICAL 3": Assign a desired DIGITAL AUDIO IN jack to the STRM BOX input selector.
CD
"COAXIAL 1", "COAXIAL 2", "OPTICAL 1", "OPTICAL 2", "OPTICAL 3": Assign a desired DIGITAL AUDIO IN jack to the CD input selector.
TV
"COAXIAL 1", "COAXIAL 2", "OPTICAL 1", "OPTICAL 2", "OPTICAL 3": Assign a desired DIGITAL AUDIO IN jack to the TV input selector.
Supported sampling rates for PCM signals (stereo, mono) from a digital input are 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz/16 bit, 20 bit, and 24 bit.
Analog Audio Input
You can change input assignment between the input selectors and AUDIO IN jacks. If you do not assign a jack, select "-----".
BD/DVD
"AUDIO 1" to "AUDIO 6": Assign a desired AUDIO IN jack to the BD/DVD input selector.
CBL/SAT
"AUDIO 1" to "AUDIO 6": Assign a desired AUDIO IN jack to the CBL/SAT input selector.
GAME
"AUDIO 1" to "AUDIO 6": Assign a desired AUDIO IN jack to the GAME input selector.
STRM BOX
"AUDIO 1" to "AUDIO 6": Assign a desired AUDIO IN jack to the STRM BOX input selector.
CD
"AUDIO 1" to "AUDIO 6": Assign a desired AUDIO IN jack to the CD input selector.
TV
"AUDIO 1" to "AUDIO 6": Assign a desired AUDIO IN jack to the TV input selector.
Input Skip
You can skip inputs to which nothing is connected when selecting them with the INPUT SELECTOR dial on the main unit or with the 
/ 
input selectors on the remote controller.
BD/DVD
Set whether to skip the BD/DVD input selector. Select "Skip" to skip this input.
CBL/SAT
Set whether to skip the CBL/SAT input selector. Select "Skip" to skip this input.
GAME
Set whether to skip the GAME input selector. Select "Skip" to skip this input.
STRM BOX
Set whether to skip the STRM BOX input selector. Select "Skip" to skip this input.
HDMI 5
Set whether to skip the HDMI 5 input selector. Select "Skip" to skip this input.
HDMI 6
Set whether to skip the HDMI 6 input selector. Select "Skip" to skip this input.
HDMI 7
Set whether to skip the HDMI 7 input selector. Select "Skip" to skip this input.
AUX
Set whether to skip the AUX input selector. Select "Skip" to skip this input.
CD
Set whether to skip the CD input selector. Select "Skip" to skip this input.
TV
Set whether to skip the TV input selector. Select "Skip" to skip this input.
PHONO
Set whether to skip the PHONO input selector. Select "Skip" to skip this input.
TUNER
Set whether to skip the TUNER input selector. Select "Skip" to skip this input.
NET
Set whether to skip the NET input selector. Select "Skip" to skip this input.
USB
Set whether to skip the USB input selector. Select "Skip" to skip this input.
BT AUDIO
Set whether to skip the BT AUDIO input selector. Select "Skip" to skip this input.
Speaker
You can make changes to the connection environment of the speakers and change the volume level. Settings are automatically configured if you use Full Auto MCACC. This setting cannot be selected if headphones are connected or audio is output from the speakers of the TV.
Configuration
Speaker Channels
Select "2.1 ch", "3.1 ch", "4.1 ch", "5.1 ch", "6.1 ch", "7.1 ch", "2.1.2 ch", "3.1.2 ch", "4.1.2 ch", "5.1.2 ch", "6.1.2 ch", "7.1.2 ch", "4.1.4 ch", "5.1.4 ch", "6.1.4 ch", or "7.1.4 ch" to suit the number of speaker channels connected.
This unit consists of a 9 ch amplifier, so with "6.1.4 ch" or "7.1.4 ch" selected, use an analog audio cable to connect the power amplifier to the PRE OUT SURR BACK jacks on this unit, then connect the surround back speakers to the power amplifier.
Subwoofer
Set the PRE OUT SUBWOOFER jacks which output audio signals.
"1ch": Only the PRE OUT SUBWOOFER 1 jacks output audio signals.
"2ch": Both the PRE OUT SUBWOOFER 1 jacks and the PRE OUT SUBWOOFER 2 jacks output audio signals.
"No": Neither the PRE OUT SUBWOOFER 1 jacks nor the PRE OUT SUBWOOFER 2 jacks output audio signals.
Height 1 Speaker
Set the speaker type if height speakers are connected to the HEIGHT 1 terminals. Select "Front High", "Top Front", "Top Middle", "Top Rear", "Rear High", "Dolby Speaker (Front)", "Dolby Speaker (Surr)", or "Dolby Speaker (Back)" according to the type and layout of the connected speakers.
This setting cannot be selected under any of following conditions. Set the height speakers type to "Height 2 Speaker".
–"System Setup" - "Speaker" - "Configuration" - "Bi-Amp" is set to "Front"
–"System Setup" - "Speaker" - "Configuration" - "Zone Speaker" is set to "Zone 2/Zone 3"
When two sets of height speakers are being used, "Top Rear", "Rear High", "Dolby Speaker (Surr)", and "Dolby Speaker (Back)" cannot be selected
"Dolby Speaker (Surr)" and "Dolby Speaker (Back)" can only be selected when surround speakers or surround back speakers are being used, respectively. You can check speakers that you are using on the figure displayed in "System Setup" - "Speaker" - "Configuration" - "Speaker Channels".
If an item cannot be selected even though connection is correct, check that the settings in "System Setup" - "Speaker" - "Configuration" - "Speaker Channels" matches the number of connected channels.
Height 2 Speaker
Set the speaker type if height speakers are connected to the HEIGHT 2 terminals. Select "Front High", "Top Front", "Top Middle", "Top Rear", "Rear High", "Dolby Speaker (Front)", "Dolby Speaker (Surr)", or "Dolby Speaker (Back)" according to the type and layout of the connected speakers. However, the options selectable for the "Height 1 Speaker" the are as follows.
If "Height 1 Speaker" is set to "Front High": Select from "Top Middle", "Top Rear", "Rear High", "Dolby Speaker (Surr)", or "Dolby Speaker (Back)".
If "Height 1 Speaker" is set to "Top Front" or "Dolby Speaker (Front)": Select from "Top Rear", "Rear High", "Dolby Speaker (Surr)", or "Dolby Speaker (Back)".
If "Height 1 Speaker" is set to "Top Middle": Fixed to "Rear High".
"Dolby Speaker (Surr)" and "Dolby Speaker (Back)" can only be selected when surround speakers or surround back speakers are being used, respectively. You can check speakers that you are using on the figure displayed in "System Setup" - "Speaker" - "Configuration" - "Speaker Channels".
If an item cannot be selected even though connection is correct, check that the settings in "System Setup" - "Speaker" - "Configuration" - "Speaker Channels" matches the number of connected channels.
Zone Speaker
Set the connection of speakers to Zone 2 or Zone 3 speaker terminals.
"Zone 2": When speakers are connected only to Zone 2 speaker terminals
"Zone 2/Zone 3": When speakers are connected to both Zone 2 and Zone 3 speaker terminals
"Zone 2/Zone 3" cannot be selected when surround back speakers and height speakers are being used.
"No": When speakers are not connected to either speaker terminals
This item will be set to "No" when two sets of height speakers are being used.
Speaker B
Set whether you will use the Speaker B system.
"No": Speaker B system will not be used
"Yes": Speaker B system will be used without bi-amp connection
"Bi-Amp": Speaker B system will be used with bi-amp connection
"Bi-Amp" cannot be selected when height speakers are being used.
In any of the following cases, this item will be set to "No":
–When "System Setup" - "Speaker" - "Configuration" - "Zone Speaker" is set to other than "No"
–When two sets of height speakers are being used
Bi-Amp
Set whether the speakers are bi-amp connected.
"No": When speakers are not bi-amp connected to any speaker terminals
"Front": When using bi-amp connection for the front speakers only
"Front / Center": When using bi-amp connection for the front speakers and the center speaker. This can only be selected when you have set "Speaker Channels" to "3.1 ch" or "5.1 ch".
"Front / Surround": When using bi-amp connection for the front speakers and the surround speakers. This can only be selected when you have set "Speaker Channels" to "4.1 ch" or "5.1 ch".
This item will be set to "No" when using ZONE 3 or Speakers B, or when two sets of height speakers are being used. This item will also be set to "No" when height speakers and ZONE speakers are being used at the same time.
You cannot select a setting other than "No" or "Front" when using ZONE speakers.
Crossover
Front
Set the low range capabilities for each channel by setting either small or large.
"Small": For small speakers whose low range capabilities may be limited
"Large": For full-range speakers with sufficient low range capabilities
If "System Setup" - "Speaker" - "Configuration" - "Subwoofer" is set to "No", "Front" will be fixed to "Large" and the low pitched range of the other channels will be output from the front speakers. Refer to the instruction manual of your speakers to make the setting.
Center
Set the low range capabilities for each channel by setting either small or large.
"Small": For small speakers whose low range capabilities may be limited
"Large": For full-range speakers with sufficient low range capabilities
When "Front" is set to "Small", this is set to "Small".
If an item cannot be selected even though connection is correct, check that the settings in "System Setup" - "Speaker" - "Configuration" - "Speaker Channels" matches the number of connected channels.
Height 1
Set the low range capabilities for each channel by setting either small or large.
"Small": For small speakers whose low range capabilities may be limited
"Large": For full-range speakers with sufficient low range capabilities
When "Front" is set to "Small", this is set to "Small".
If an item cannot be selected even though connection is correct, check that the settings in "System Setup" - "Speaker" - "Configuration" - "Speaker Channels" matches the number of connected channels.
Height 2
Set the low range capabilities for each channel by setting either small or large.
"Small": For small speakers whose low range capabilities may be limited
"Large": For full-range speakers with sufficient low range capabilities
When "Front" is set to "Small", this is set to "Small".
If an item cannot be selected even though connection is correct, check that the settings in "System Setup" - "Speaker" - "Configuration" - "Speaker Channels" matches the number of connected channels.
Surround
Set the low range capabilities for each channel by setting either small or large.
"Small": For small speakers whose low range capabilities may be limited
"Large": For full-range speakers with sufficient low range capabilities
When "Front" is set to "Small", this is set to "Small".
If an item cannot be selected even though connection is correct, check that the settings in "System Setup" - "Speaker" - "Configuration" - "Speaker Channels" matches the number of connected channels.
Surround Back
Set the low range capabilities for each channel by setting either small or large.
"Small": For small speakers whose low range capabilities may be limited
"Large": For full-range speakers with sufficient low range capabilities
When "Surround" is set to "Small", this is set to "Small".
If an item cannot be selected even though connection is correct, check that the settings in "System Setup" - "Speaker" - "Configuration" - "Speaker Channels" matches the number of connected channels.
Crossover
When there are speakers that have been set to "Small", set the Hz under which you would like other speakers to play bass, and also set Hz under which you would like the LFE (low frequency effect) to play the bass.
The value from "50Hz" to "200Hz" can be set.
Double Bass
This can be selected only when "System Setup" - "Speaker" - "Configuration" - "Subwoofer" is set to other than "No" and "Front" is set to "Large".
Boost bass output by feeding bass sounds from the front left and right, and center speakers to the subwoofer.
"On": Bass output will be boosted
"Off": Bass output will not be boosted
The setting will not automatically be configured even if you performed Full Auto MCACC.
Distance
Set the distance from each speaker to the listening position. Press 
on the remote controller, and select the MCACC Memory first in "AV Adjust" - "MCACC" - "MCACC Memory".
Front Left
Specify the distance between each speaker and the listening position.
Center
Specify the distance between each speaker and the listening position.
Front Right
Specify the distance between each speaker and the listening position.
Height 1 Left
Specify the distance between each speaker and the listening position.
Depending on the use of the ZONE speakers, it may not be possible to select this setting.
Height 1 Right
Specify the distance between each speaker and the listening position.
Depending on the use of the ZONE speakers, it may not be possible to select this setting.
Height 2 Left
Specify the distance between each speaker and the listening position.
Depending on the use of the ZONE speakers, it may not be possible to select this setting.
Height 2 Right
Specify the distance between each speaker and the listening position.
Depending on the use of the ZONE speakers, it may not be possible to select this setting.
Surround Right
Specify the distance between each speaker and the listening position.
Surr Back Right
Specify the distance between each speaker and the listening position.
Depending on the use of the ZONE speakers, it may not be possible to select this setting.
Surr Back Left
Specify the distance between each speaker and the listening position.
Depending on the use of the ZONE speakers, it may not be possible to select this setting.
Surround Left
Specify the distance between each speaker and the listening position.
Subwoofer 1
Specify the distance between each speaker and the listening position.
Subwoofer 2
Specify the distance between each speaker and the listening position.
Default values vary depending on the regions.
Distance units can be switched by pressing MODE on the remote controller. When the unit is set as feet, you can set between 0' 0" 1/2 and 30' 0" in increments of 1/2. When the unit is set as meters, you can set between 0.01 m and 9.00 m in increments of 0.01 m.
Channel Level
Set the volume level of the speakers. If multiple settings are saved in the MCACC Memory, press 
on the remote controller, and select the MCACC Memory first in "AV Adjust" - "MCACC" - "MCACC Memory".
Front Left
Select a value between "－12.0 dB" and "＋12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level.
Center
Select a value between "－12.0 dB" and "＋12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level.
Front Right
Select a value between "－12.0 dB" and "＋12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level.
Height 1 Left
Select a value between "－12.0 dB" and "＋12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level.
Depending on the use of the ZONE speakers, it may not be possible to select this setting.
Height 1 Right
Select a value between "－12.0 dB" and "＋12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level.
Depending on the use of the ZONE speakers, it may not be possible to select this setting.
Height 2 Left
Select a value between "－12.0 dB" and "＋12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level.
Depending on the use of the ZONE speakers, it may not be possible to select this setting.
Height 2 Right
Select a value between "－12.0 dB" and "＋12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level.
Depending on the use of the ZONE speakers, it may not be possible to select this setting.
Surround Right
Select a value between "－12.0 dB" and "＋12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level.
Surr Back Right
Select a value between "－12.0 dB" and "＋12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level.
Depending on the use of the ZONE speakers, it may not be possible to select this setting.
Surr Back Left
Select a value between "－12.0 dB" and "＋12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level.
Depending on the use of the ZONE speakers, it may not be possible to select this setting.
Surround Left
Select a value between "－12.0 dB" and "＋12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level.
Subwoofer 1
Select a value between "－15.0 dB" and "＋12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level.
Subwoofer 2
Select a value between "－15.0 dB" and "＋12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level.
Dolby Enabled Speaker
Dolby Enabled Speaker to Ceiling
Set the distance between the Dolby Enabled Speaker and the ceiling. Select between " 0' 0" 1/2 "/"0.01 m" to " 15' 0" "/"4.50 m" (1/2 / 0.01 m units).
The unit of distance (feet / meters) shown is the unit selected for use in "Distance".
Reflex Optimizer
You can enhance the reflection effect of Dolby Enabled Speakers from the ceiling.
"Off": Do not use this function
"On": Use this function
The function is not effective if the listening mode is Pure Direct.
This setting can be selected when "System Setup" - "Speaker" - "Configuration" - "Height 1 Speaker"/"Height 2 Speaker" is set to "Dolby Speaker".
Audio Adjust
Make advanced settings such as those related to multiplex audio or those related to the volume of this unit.
Dual Mono/Mono
Dual Mono
Set the audio channel or language to be output when playing multiplex audio or multilingual TV broadcasts etc.
"Main": Main channel only
"Sub": Sub channel only
"Main/Sub": Main and sub channels will be output at the same time.
If multiplex audio is being played, "1＋1" will be displayed when 
on the remote controller is pressed.
Mono Input Channel
Set the input channel to use for playing any 2 ch digital source such as Dolby Digital, or 2 ch analog/PCM source in the Mono listening mode.
"Left": Left channel only
"Right": Right channel only
"Left+Right": Left and right channels
Dolby
Loudness Management
When playing Dolby TrueHD, enable the dialog normalization function which keeps the volume of dialog at a certain level. Note that when this setting is Off, the DRC function that allows you to enjoy surround at low volumes is fixed to off when playing Dolby Digital Plus/Dolby TrueHD.
"On": Use this function
"Off": Do not use this function
Volume
Mute Level
Set the volume lowered from the listening volume when muting is on. Select a value from "－∞ dB",
"－40 dB", and "－20 dB".
Volume Limit
Set the maximum value to avoid too high volume. Select "Off" or a value between "－32 dB" and "＋17 dB".
Power On Level
Set the volume level of when the power is turned on. Select a value from "Last" (volume before entering standby mode), "－∞ dB", and "－81.5 dB" to "＋18.0 dB".
You cannot set a higher value than that of "Volume Limit".
Headphone Level
Adjust the output level of the headphones. Select a value between "－12.0 dB" and "＋12.0 dB".
Source
Make settings for input sources, such as volume difference adjustments for each input selector for the connected equipment.
Input Volume Absorber
Adjust the volume level difference between the devices connected to the unit. Select the input selector to configure.
Input Volume Absorber
Select a value between "－12.0 dB" and "＋12.0 dB". Set a negative value if the volume of the target device is larger than the others and a positive value if smaller. To check the audio, start playback of the connected device.
This function is not effective in Zone 2/Zone 3.
Name Edit
Set an easy name to each input. The set name will be shown on the main unit display. Select the input selector to configure.
Name Edit
1.Select a character or symbol with the cursors and press ENTER.
Repeat it to input 10 or less characters.
"A/a": Switches between upper and lower cases. (Pressing MODE on the remote controller also toggles between upper and lower cases)
"←" "→": Moves the cursor to the arrow direction.
"
": Removes a character on the left of the cursor.
"
": Enters a space.
Pressing CLEAR on the remote controller will remove all the input characters.
2.After inputting, select "OK" with the cursors and press ENTER.
The input name will be saved.
To name a preset radio station, press TUNER on the remote controller, select AM/FM and select the preset number.
This cannot be set if the "NET", "USB" or "BT AUDIO" input is selected.
Audio Select
Select the priority for input selection when multiple audio sources are connected to one input selector, such as connections to both the "BD/DVD" HDMI IN jack and the "BD/DVD" AUDIO IN jack. The setting can be separately set to each input selector. Select the input selector to configure. Note that there are some default values you cannot change.
Audio Select
"ARC": When giving priority to input signal from ARC compatible TV.
The setting can be selected only when "System Setup" - "Hardware" - "HDMI" - "Audio Return Channel" is set to "Auto" and also the "TV" input is selected.
"HDMI": When giving priority to input signal from HDMI IN jacks
The setting can be selected only when the input is assigned to the HDMI jack in the "System Setup" - "Input/Output Assign" - "HDMI Input" setting.
"COAXIAL": When giving priority to input signal from DIGITAL AUDIO IN COAXIAL jacks
The setting can be selected only when the input is assigned to the COAXIAL jack in the "System Setup" - "Input/Output Assign" - "Digital Audio Input" setting.
"OPTICAL": When giving priority to input signal from DIGITAL AUDIO IN OPTICAL jacks
The setting can be selected only when the input is assigned to the OPTICAL jack in the "System Setup" - "Input/Output Assign" - "Digital Audio Input" setting.
"Analog": To always output analog audio independently of the input signal
The setting can be selected only when the input is assigned to the AUDIO IN jack in the "System Setup" - "Input/Output Assign" - "Analog Audio Input" setting.
Fixed PCM
Select whether to fix input signals to PCM (except multi-channel PCM) when you have selected "HDMI", "COAXIAL", or "OPTICAL" in the "Audio Select" setting. Set this item to "On" if noise is produced or truncation occurs at the beginning of a track when playing PCM sources. Select "Off" normally.
Changing "Audio Select" changes the setting to "Off".
The setting cannot be changed when "TUNER", "NET", "USB", "BT AUDIO" or "PHONO" input is selected.
Hardware
Make settings related to the HDMI CEC, HDMI Standby Through, or ARC features, settings related to power management of the unit, such as Auto Standby and Network Standby, and output settings for the 12V Trigger jack.
HDMI
HDMI CEC
Setting to "On" enables the input selection link and other link functions with HDMI connected CEC compliant device.
"On": Use this function
"Off": Do not use this function
When changing this setting, turn off and then on again the power of all connected components.
Depending on the TV set, a link may need to be configured on the TV.
This function is effective only when the device is connected to the HDMI OUT MAIN terminal.
Setting to "On" and closing the on-screen menu displays the name of the CEC-compatible components and "CEC On" on the display.
Power consumption in standby mode may increase if "On" is set. (Depending on the TV status, the unit will enter the normal standby mode.)
If you operate the MASTER VOLUME dial on the main unit when this setting is "On" and audio is output from the TV speakers, audio will be output also from the speakers connected to the unit. If you want to output from only either of them, change the unit or TV settings, or reduce the volume of the unit.
If abnormal operation occurs when you set the setting to "On", set it to "Off".
When connecting a non-CEC compatible component, or when you are not sure whether it is compatible, set the setting to "Off".
HDMI Standby Through
When this is set to anything other than "Off", you can play the video and audio of an HDMI connected player on the TV even if the unit is in standby mode. Only "Auto" and "Auto(Eco)" can be selected if "HDMI CEC" is set to "On". If you select anything else, set "HDMI CEC" to "Off".
Power consumption in standby mode increases if set to anything other than "Off".
"BD/DVD", "CBL/SAT", "GAME", "STRM BOX", "HDMI 5", "HDMI 6", "HDMI 7", "AUX": For example, if you select "BD/DVD", you can play the equipment connected to the "BD/DVD" jack on the TV even if the unit is in standby mode. Select this setting if you have decided which player to use with this function.
"Last": You can play the video and audio of the input selected immediately prior to the unit being switched to standby on the TV.
"Auto", "Auto (Eco)": Select one of these settings when you have connected equipment that conforms to the CEC standard. You can play the video and audio of the input selected on the TV, irrespective of what input was selected immediately prior to the unit being switched to standby, using the CEC link function.
To play players on the TV that do not conform to the CEC standard, you will need to turn the unit on and switch to the relevant input.
When using TV that complies with the CEC standard, you can reduce the power consumption in standby mode by selecting "Auto (Eco)".
Audio TV Out
You can enjoy audio through the speakers of the TV while this unit is on.
"On": Use this function
"Off": Do not use this function
This setting is fixed to "Auto" if you have set "System Setup" - "Input/Output Assign" - "TV Out/OSD" - "HDMI Out" or "Other" - "HDMI Out" in "AV Adjust" to "MAIN" or "MAIN+SUB" and "HDMI CEC" is set to "On". If you change this setting, set "HDMI CEC" to "Off".
Listening mode cannot be changed while "Audio TV Out" is set to "On" and audio is being output through the speakers of the TV.
Depending on your TV set or input signal of the component, audio may not output through the speakers of the TV even if this setting is set to "On". In such case, audio is output from the speakers of the unit.
If you operate the MASTER VOLUME dial on this unit when audio that is being input through this unit for output from the TV speakers, audio is output from this unit. If you do not want to output audio from the unit, change the unit or TV settings, or reduce the volume of the unit.
Audio Return Channel
You can enjoy sound of the HDMI connected ARC compatible TV through the speakers connected to the unit.
＊To use this function, set "HDMI CEC" to "On" in advance.
"Auto": When enjoying the TV sound through the speakers connected to the unit
"Off": When not using the ARC function
PQLS
Enables high-quality playback of audio from AV components that support PQLS (Precision Quartz Lock System) connected by HDMI.
"Auto": Use this function
"Off": Do not use this function
To use this function, set "HDMI CEC" to "On" in advance.
Auto Delay
This setting automatically corrects any desynchronization between the video and audio signals based on data from the HDMI LipSync compatible TV.
"On": Automatic correction will be enabled
"Off": Automatic correction will be disabled
Power Management
Sleep Timer
Allows the unit to enter standby automatically when the specified time elapses. Select a value from "30 minutes", "60 minutes", and "90 minutes".
"Off": Does not turn the unit to standby automatically
Auto Standby
This setting places the unit on standby automatically after 20 minutes of inactivity without any video or audio input. (When "Network Standby" is on, this becomes the HYBRID STANDBY mode which reduces the increase in power consumption to a minimum.)
"On": The unit will automatically enter standby mode ("AUTO STBY" will light.)
"Off": The unit will not automatically enter standby mode
"Auto Standby" is displayed on the display and TV screen 30 seconds before the Auto Standby comes on.
"Auto Standby" does not work when Zone 2/Zone 3 is active.
Default values vary depending on the regions.
Auto Standby in HDMI Standby Through
Enable or disable "Auto Standby" while "HDMI Standby Through" is on.
"On": The setting will be enabled
"Off": The setting will be disabled
This setting cannot be set to "On" if "Auto Standby" and "HDMI Standby Through" are set to "Off".
Network Standby
When this feature is turned "On", you can turn on the power of the unit via the network using an application such as iControlAV5 that can control this unit.
When "Network Standby" is used, the power consumption increases even when the unit is on standby. However, the increase in power consumption is kept to a minimum by automatically entering the HYBRID STANDBY mode, where only the essential circuit is operating.
"Network Standby", which suppresses power consumption, may be disabled when the network connection is lost. Use the power button on the remote controller or main unit to turn the unit on if this happens.
Bluetooth Wakeup
This function wakes up the unit on standby by connecting a BLUETOOTH enabled device.
"On": Use this function
"Off": Do not use this function
Setting to "On" increases the power consumption even when the unit is on standby. However, the increase in power consumption is kept to a minimum by automatically entering the HYBRID STANDBY mode, where only the essential circuit is operating.
This setting is fixed to "Off" if "Network/Bluetooth" - "Bluetooth" - "Auto Input Change" is set to "Off".
Wait for a while if "Network Standby" and "Bluetooth Wakeup" cannot be selected. It will appear when the network feature is started.
12V Trigger A
Set when outputting the control signal (maximum 12 V/100 mA) through the 12V TRIGGER OUT A jack. Different settings can be set for each input selector. You can enable power link operation when you connect the unit and the external devices equipped with 12V trigger input jack.
HDMI Out
Set when you want to output a 12V trigger in response to switching of an HDMI OUT jack that outputs video.
"Off": No output
"MAIN": Output when switched to the HDMI OUT MAIN jack.
"SUB": Output when switched to the HDMI OUT SUB jack.
This can be selected only when "System Setup" - "Input/Output Assign" - "TV Out/OSD" - "Zone 2 HDMI" is set to "Not Use".
"ZONE 2": Output when switched to the HDMI OUT ZONE 2 jack.
This can be selected only when "System Setup" - "Input/Output Assign" - "TV Out/OSD" - "Zone 2 HDMI" is set to "Use".
BD/DVD
Set the 12V trigger output setting to each input.
To use this function, set "HDMI Out" to "Off" in advance.
"Off": No output
"Main": Output when "BD/DVD" is selected as input source for the main room.
"Zone2": Output when "BD/DVD" is selected as input source for ZONE2.
"Zone3": Output when "BD/DVD" is selected as input source for ZONE3.
CBL/SAT
Set the 12V trigger output setting to each input.
To use this function, set "HDMI Out" to "Off" in advance.
"Off": No output
"Main": Output when "CBL/SAT" is selected as input source for the main room.
"Zone2": Output when "CBL/SAT" is selected as input source for ZONE2.
"Zone3": Output when "CBL/SAT" is selected as input source for ZONE3.
GAME
Set the 12V trigger output setting to each input.
To use this function, set "HDMI Out" to "Off" in advance.
"Off": No output
"Main": Output when "GAME" is selected as input source for the main room.
"Zone2": Output when "GAME" is selected as input source for ZONE2.
"Zone3": Output when "GAME" is selected as input source for ZONE3.
STRM BOX
Set the 12V trigger output setting to each input.
To use this function, set "HDMI Out" to "Off" in advance.
"Off": No output
"Main": Output when "STRM BOX" is selected as input source for the main room.
"Zone2": Output when "STRM BOX" is selected as input source for ZONE2.
"Zone3": Output when "STRM BOX" is selected as input source for ZONE3.
HDMI 5
Set the 12V trigger output setting to each input.
To use this function, set "HDMI Out" to "Off" in advance.
"Off": No output
"Main": Output when "HDMI 5" is selected as input source for the main room.
"Zone2": Output when "HDMI 5" is selected as input source for ZONE2.
HDMI 6
Set the 12V trigger output setting to each input.
To use this function, set "HDMI Out" to "Off" in advance.
"Off": No output
"Main": Output when "HDMI 6" is selected as input source for the main room.
HDMI 7
Set the 12V trigger output setting to each input.
To use this function, set "HDMI Out" to "Off" in advance.
"Off": No output
"Main": Output when "HDMI 7" is selected as input source for the main room.
AUX
Set the 12V trigger output setting to each input.
To use this function, set "HDMI Out" to "Off" in advance.
"Off": No output
"Main": Output when "AUX" is selected as input source for the main room.
CD
Set the 12V trigger output setting to each input.
To use this function, set "HDMI Out" to "Off" in advance.
"Off": No output
"Main": Output when "CD" is selected as input source for the main room.
"Zone2": Output when "CD" is selected as input source for ZONE2.
"Zone3": Output when "CD" is selected as input source for ZONE3.
TV
Set the 12V trigger output setting to each input.
To use this function, set "HDMI Out" to "Off" in advance.
"Off": No output
"Main": Output when "TV" is selected as input source for the main room.
"Zone2": Output when "TV" is selected as input source for ZONE2.
"Zone3": Output when "TV" is selected as input source for ZONE3.
PHONO
Set the 12V trigger output setting to each input.
To use this function, set "HDMI Out" to "Off" in advance.
"Off": No output
"Main": Output when "PHONO" is selected as input source for the main room.
"Zone2": Output when "PHONO" is selected as input source for ZONE2.
"Zone3": Output when "PHONO" is selected as input source for ZONE3.
TUNER
Set the 12V trigger output setting to each input.
To use this function, set "HDMI Out" to "Off" in advance.
"Off": No output
"Main": Output when "TUNER" is selected as input source for the main room.
"Zone2": Output when "TUNER" is selected as input source for ZONE2.
"Zone3": Output when "TUNER" is selected as input source for ZONE3.
NET
Set the 12V trigger output setting to each input.
To use this function, set "HDMI Out" to "Off" in advance.
"Off": No output
"Main": Output when "NET" is selected as input source for the main room.
"Zone2": Output when "NET" is selected as input source for ZONE2.
"Zone3": Output when "NET" is selected as input source for ZONE3.
USB
Set the 12V trigger output setting to each input.
To use this function, set "HDMI Out" to "Off" in advance.
"Off": No output
"Main": Output when "USB" is selected as input source for the main room.
"Zone2": Output when "USB" is selected as input source for ZONE2.
"Zone3": Output when "USB" is selected as input source for ZONE3.
BT AUDIO
Set the 12V trigger output setting to each input.
To use this function, set "HDMI Out" to "Off" in advance.
"Off": No output
"Main": Output when "BT AUDIO" is selected as input source for the main room.
"Zone2": Output when "BT AUDIO" is selected as input source for ZONE2.
"Zone3": Output when "BT AUDIO" is selected as input source for ZONE3.
12V Trigger B
Set when outputting the control signal (maximum 12 V/25 mA) through the 12V TRIGGER OUT B jack. Different settings can be set for each input selector. You can enable power link operation when you connect the unit and the external devices equipped with 12V trigger input jack.
HDMI Out
Set when you want to output a 12V trigger in response to switching of an HDMI OUT jack that outputs video.
"Off": No output
"MAIN": Output when switched to the HDMI OUT MAIN jack.
"SUB": Output when switched to the HDMI OUT SUB jack.
This can be selected only when "System Setup" - "Input/Output Assign" - "TV Out/OSD" - "Zone 2 HDMI" is set to "Not Use".
"ZONE 2": Output when switched to the HDMI OUT ZONE 2 jack.
This can be selected only when "System Setup" - "Input/Output Assign" - "TV Out/OSD" - "Zone 2 HDMI" is set to "Use".
BD/DVD
Set the 12V trigger output setting to each input.
To use this function, set "HDMI Out" to "Off" in advance.
"Off": No output
"Main": Output when "BD/DVD" is selected as input source for the main room.
"Zone2": Output when "BD/DVD" is selected as input source for ZONE2.
"Zone3": Output when "BD/DVD" is selected as input source for ZONE3.
CBL/SAT
Set the 12V trigger output setting to each input.
To use this function, set "HDMI Out" to "Off" in advance.
"Off": No output
"Main": Output when "CBL/SAT" is selected as input source for the main room.
"Zone2": Output when "CBL/SAT" is selected as input source for ZONE2.
"Zone3": Output when "CBL/SAT" is selected as input source for ZONE3.
GAME
Set the 12V trigger output setting to each input.
To use this function, set "HDMI Out" to "Off" in advance.
"Off": No output
"Main": Output when "GAME" is selected as input source for the main room.
"Zone2": Output when "GAME" is selected as input source for ZONE2.
"Zone3": Output when "GAME" is selected as input source for ZONE3.
STRM BOX
Set the 12V trigger output setting to each input.
To use this function, set "HDMI Out" to "Off" in advance.
"Off": No output
"Main": Output when "STRM BOX" is selected as input source for the main room.
"Zone2": Output when "STRM BOX" is selected as input source for ZONE2.
"Zone3": Output when "STRM BOX" is selected as input source for ZONE3.
HDMI 5
Set the 12V trigger output setting to each input.
To use this function, set "HDMI Out" to "Off" in advance.
"Off": No output
"Main": Output when "HDMI 5" is selected as input source for the main room.
"Zone2": Output when "HDMI 5" is selected as input source for ZONE2.
HDMI 6
Set the 12V trigger output setting to each input.
To use this function, set "HDMI Out" to "Off" in advance.
"Off": No output
"Main": Output when "HDMI 6" is selected as input source for the main room.
HDMI 7
Set the 12V trigger output setting to each input.
To use this function, set "HDMI Out" to "Off" in advance.
"Off": No output
"Main": Output when "HDMI 7" is selected as input source for the main room.
AUX
Set the 12V trigger output setting to each input.
To use this function, set "HDMI Out" to "Off" in advance.
"Off": No output
"Main": Output when "AUX" is selected as input source for the main room.
CD
Set the 12V trigger output setting to each input.
To use this function, set "HDMI Out" to "Off" in advance.
"Off": No output
"Main": Output when "CD" is selected as input source for the main room.
"Zone2": Output when "CD" is selected as input source for ZONE2.
"Zone3": Output when "CD" is selected as input source for ZONE3.
TV
Set the 12V trigger output setting to each input.
To use this function, set "HDMI Out" to "Off" in advance.
"Off": No output
"Main": Output when "TV" is selected as input source for the main room.
"Zone2": Output when "TV" is selected as input source for ZONE2.
"Zone3": Output when "TV" is selected as input source for ZONE3.
PHONO
Set the 12V trigger output setting to each input.
To use this function, set "HDMI Out" to "Off" in advance.
"Off": No output
"Main": Output when "PHONO" is selected as input source for the main room.
"Zone2": Output when "PHONO" is selected as input source for ZONE2.
"Zone3": Output when "PHONO" is selected as input source for ZONE3.
TUNER
Set the 12V trigger output setting to each input.
To use this function, set "HDMI Out" to "Off" in advance.
"Off": No output
"Main": Output when "TUNER" is selected as input source for the main room.
"Zone2": Output when "TUNER" is selected as input source for ZONE2.
"Zone3": Output when "TUNER" is selected as input source for ZONE3.
NET
Set the 12V trigger output setting to each input.
To use this function, set "HDMI Out" to "Off" in advance.
"Off": No output
"Main": Output when "NET" is selected as input source for the main room.
"Zone2": Output when "NET" is selected as input source for ZONE2.
"Zone3": Output when "NET" is selected as input source for ZONE3.
USB
Set the 12V trigger output setting to each input.
To use this function, set "HDMI Out" to "Off" in advance.
"Off": No output
"Main": Output when "USB" is selected as input source for the main room.
"Zone2": Output when "USB" is selected as input source for ZONE2.
"Zone3": Output when "USB" is selected as input source for ZONE3.
BT AUDIO
Set the 12V trigger output setting to each input.
To use this function, set "HDMI Out" to "Off" in advance.
"Off": No output
"Main": Output when "BT AUDIO" is selected as input source for the main room.
"Zone2": Output when "BT AUDIO" is selected as input source for ZONE2.
"Zone3": Output when "BT AUDIO" is selected as input source for ZONE3.
Multi Zone
Make settings related to Multi-zone Connection, such as the volume for the separate room.
Zone 2
Output Level
Select whether to adjust the volume on the pre-main amplifier in the separate room or on this unit when outputting to Zone 2.
"Fixed": Adjust on the pre-main amplifier in the separate room
"Variable": Adjust on this unit
Volume Limit
Set the maximum value for Zone 2 to avoid too high volume. Select "Off" or a value between "－32 dB" and "＋17 dB".
Power On Level
Set the Zone 2 volume level of when this unit is turned on. Select a value from "Last" (volume before the unit was turned off), "－∞ dB", and "－81.5 dB" to "＋18.0 dB".
You cannot set a higher value than that of "Volume Limit".
Bass
Adjust the volume of the bass for Zone 2. Select a value between "－10 dB" and "＋10 dB".
Treble
Adjust the volume of the treble for Zone 2. Select a value between "－10 dB" and "＋10 dB".
Balance
Set the left-right balance for Zone 2. Select a between "L ＋ 10" to "R ＋ 10".
Zone 3
Output Level
Select whether to adjust the volume on the pre-main amplifier in the separate room or on this unit when outputting to Zone 3.
"Fixed": Adjust on the pre-main amplifier in the separate room
"Variable": Adjust on this unit
Volume Limit
Set the maximum value for Zone 3 to avoid too high volume. Select "Off" or a value between "－32 dB" and "＋17 dB".
Power On Level
Set the Zone 3 volume level of when this unit is turned on. Select a value from "Last" (volume before the unit was turned off), "－∞ dB", and "－81.5 dB" to "＋18.0 dB".
You cannot set a higher value than that of "Volume Limit".
Bass
Adjust the volume of the bass for Zone 3. Select a value between "－10 dB" and "＋10 dB".
Treble
Adjust the volume of the treble for Zone 3. Select a value between "－10 dB" and "＋10 dB".
Balance
Set the left-right balance for Zone 3. Select a between "L ＋ 10" to "R ＋ 10".
Miscellaneous
Change the frequency step for the tuner, update the firmware, and perform Initial Setup, etc.
Tuner
AM / FM Frequency Step (North American models)
Select a frequency step depending on your area of residence.
Select "10 kHz/0.2 MHz" or "9 kHz/0.05 MHz".
When this setting is changed, all radio presets are deleted.
AM Frequency Step (European and Asian models)
Select a frequency step depending on your area of residence.
Select "10 kHz" or "9 kHz".
When this setting is changed, all radio presets are deleted.
AM Noise Cut Mode
You can improve reception sensitivity by changing this mode if you are finding AM broadcasts difficult to hear. Select "1" or "2".
Remote ID
Remote ID
Select an ID for the unit's remote controller from "1", "2", and "3" to prevent interference between the unit and other Pioneer components that are installed in the same room. After changing the ID on the main unit, change the ID on the remote controller accordingly with the following procedure.
While holding down MODE, press the following buttons for about 3 seconds.
To change the remote controller ID to "1": 
(The remote indicator flashes once.)
To change the remote controller ID to "2": 
(The remote indicator flashes twice.)
To change the remote controller ID to "3": 
(The remote indicator flashes three times.)
Preamp Mode
If speakers are connected to the PRE OUT jacks on this unit via a power amplifier, you can reduce the power consumed by this unit by turning off the power supplied to the SPEAKERS terminals you are not using on this unit.
Preamp Mode
Select the SPEAKERS terminals whose power you want to turn off.
"No": Power is supplied to all SPEAKERS terminals. Select when a power amplifier is not connected.
"Front": Turns off the power for the SPEAKERS terminals for the front speakers.
"Front + Center": Turns off the power for the SPEAKERS terminals for the front speakers and center speaker.
"All": Turns off the power for all SPEAKERS terminals. Select when this unit is to be used as the pre-amplifier.
This setting cannot be selected when bi-amp connection is used for speakers.
Firmware Update
Update Notice
Availability of a firmware update will be notified via network.
"Enable": Notify updates
"Disable": Do not notify updates
Version
The current firmware version will be displayed.
Update via NET
Press ENTER to select when you want to update the firmware via network.
You will not be able to select this setting if you do not have Internet access or there is nothing to update.
Update via USB
Press ENTER to select when you want to update the firmware via USB.
You will not be able to select this setting if a USB storage device is not connected or there is nothing to update in the USB storage device.
Wait for a while if "Firmware Update" cannot be selected. It will appear when the network feature is started.
Initial Setup
You can make the initial setup from the setup menu.
Wait for a while if "Initial Setup" cannot be selected. It will appear when the network feature is started.
Lock
Setup Parameter
Lock the Setup menu to protect the settings.
"Locked": The menu is locked.
"Unlocked": The menu is unlocked.
