|
Settings |
Connecting a Power Amplifier
Connections
1.Connect as below using the PRE OUT terminals.
Set to suit the number of speaker channels connected.
–Press on the remote controller to display the Setup menu. Select "2. Speaker" - "Configuration" - "Speaker Channels" in order with the cursors, and set the number of speaker channels.
You can reduce power consumption by turning off the power of the SPEAKERS terminals you are not using on this unit. Make the setting in "System Setup" - "Miscellaneous" - "Preamp Mode".
SN 29402612HTML
(C) Copyright 2016 Onkyo & Pioneer Corporation Japan. All rights reserved.