Rated Output Power (FTC) (North American)
With 8 ohm loads, both channels driven, from 20-20,000 Hz; rated 80 watts per channel minimum RMS power, with no more than 0.08% total harmonic distortion from 250 milliwatts to rated output.
Surround Mode Output Power (*)
(6 ohms, 1 kHz THD 0.9%) 140 W per channel
* Reference output for each speakers.
Depending on the source and the listening mode settings, there may be no sound output.
Rated Output Power (IEC) (Others)
7 ch × 130 W at 6 ohms, 1 kHz, 1 ch driven of 1% THD
Dynamic Power (*)
* IEC60268-Short-term maximum output power
160 W (3 Ω, Front)
125 W (4 Ω, Front)
85 W (8 Ω, Front)
THD+N (Total Harmonic Distortion+Noise)
0.08% (20 Hz - 20,000 Hz, half power)
Input Sensitivity and Impedance (1 kHz 100 W/8 Ω)
200 mV/47 kΩ (LINE (Unbalance))
3.5 mV/47 kΩ (PHONO MM)
Rated RCA Output Level and Impedance
1 V/470 Ω (SUBWOOFER PRE OUT)
Phono Overload
70 mV (MM 1 kHz 0.5%)
Frequency Response
5 Hz - 100 kHz/+1 dB, –3 dB (Pure Direct)
Tone Control Characteristics
±10 dB, 90 Hz (BASS)
±10 dB, 7.5 kHz (TREBLE)
Signal to Noise Ratio
106 dB (IHF-A, LINE IN, SP OUT)
80 dB (IHF-A, PHONO IN, SP OUT)
Speaker Impedance
6 Ω - 16 Ω
Headphone Output Impedance
330 Ω
Headphone Rated Output
85 mW (32 Ω, 1 kHz, 10% THD)
Signal level
1 Vp-p/75 Ω (Composite Video)
FM Tuning Frequency Range
87.5 MHz - 107.9 MHz
AM Tuning Frequency Range
530 kHz - 1710 kHz
Preset Channel
40
Ethernet LAN
10BASE-T/100BASE-TX
Wireless LAN
IEEE 802.11 a/b/g/n standard
(Wi-Fi® standard)
5 GHz/2.4 GHz band
Communication system
BLUETOOTH Specification version 4.1+LE
Frequency band
2.4 GHz band
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible BLUETOOTH profiles
A2DP 1.2
AVRCP 1.3
HOGP-Host (Client)
HOGP-HID Device (Server)
HID Service (HIDS)
Supported Codecs
SBC
AAC
Transmission range (A2DP)
20 Hz - 20 kHz (Sampling frequency 44.1 kHz)
Maximum communication range
Line of sight approx. 15 m (*)
* The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone, reception sensitivity, antenna's performance, operating system, software application, etc.
Power Supply
AC 120 V, 60 Hz
Power Consumption
460 W
0.1 W (Stand-by)
55 W (No-sound)
4.9 W (HDMI Standby Through)
2.4 W (Network Standby)
Maximum Power Consumption (All ch, 1 kHz, 10% THD)
1120 W (Taiwanese)
Dimensions (W × H × D)
435 mm × 173 mm × 370.5 mm
17-1/8" × 6-13/16" × 14-9/16"
Weight
9 kg (19.8 lbs.)
Input
IN1 (BD/DVD, HDCP2.2), IN2 (CBL/SAT, HDCP2.2), IN3 (STRM BOX, HDCP2.2), IN4 (GAME), IN5, IN6
Output
OUT
Supported
Deep Color, x.v.Color™, LipSync, Audio Return Channel, 3D, 4K 60Hz, CEC, Extended Colorimetry (sYCC601, Adobe RGB, Adobe YCC601), Content Type, HDR
Audio Format
Dolby Atmos, Dolby TrueHD, Dolby Digital, Dolby Digital Plus, DTS, DTS:X (to be supported in a future update), DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS 96/24, DTS-ES, DTS-HD Express, DSD, PCM
Maximum Video Resolution
4k 60 Hz (YCbCr 4:4:4)
Composite
IN1 (BD/DVD), IN2 (CBL/SAT)
HDMI input
4K, 1080p/24, 1080p, 1080i, 720p, 480p/576p
Composite input
480i/576i
The output from the HDMI OUT jack to the TV is the same resolution as the input. When using a TV that supports 4K, 1080p HDMI video signals can also be output as 4K.
Digital
OPTICAL (TV)
COAXIAL (CD)
Analog
BD/DVD, CBL/SAT, PHONO, AUX (front)
Analog
2 SUBWOOFER PRE OUT
Speaker Outputs
FRONT L/R, CENTER, SURROUND L/R, BACK or HEIGHT L/R or Bi-Amp L/R
(Ready to receive banana plugs)
Phones
PHONES (Front, ø 6.3 mm, 1/4")
Setup Mic : 1 (Front)
USB : 1 (Ver. 2.0, 5 V/1 A)
Ethernet : 1
In the following cases, the power consumption in standby mode may reach up to a maximum of 12 W:
–When "Network Standby" is set to "On"
–When "HDMI CEC" is set to "On"
–When "HDMI Standby Through" is set to other than "Off"
–When "Bluetooth Wakeup" is set to "On"
–When "USB Power Out at Standby" is set to "On"
Specifications and features are subject to change without notice.